Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /home/dunrit8/public_html/dunriteshade.com/store/system/database/mysql.php on line 6
Pool, Boat and Water Slides
 

LiveZilla Live Help

Pool, Boat and Water Slides

 
  water slide pool slide boat slide water slide Slide for Boat Dock
11 foot deck height pool slide pool slide lake slide Twister Pool Slide long tube pool slide
Pool Slide snake turns 7 foot deck height pool slide concealed slide hidden pool slide hidden slide pool slide
7 foot deck pool slide 3 foot deck pool slide tube slide trough slide and pool slide long pool slide

Optimal site characteristics

1. Concrete deck around the pool.  If you pool deck is a typical 4" minimum thickness concrete deck, our slides will easily mount on the deck.

2. 15 to 25 feet from the water’s edge to where the concrete ends (usually there is a fence).

3. 20 feet of linear length usable space along pool edge.

4. Federal regulations dictate a minimum 40" water depth where the slide flumes enter the pool

(depths of 4 feet or greater are preferred).

5. Design adaptations available to provide flume entrances at corners and on peninsulas.

6. Electrical codes in some states dictate that our pipe structure be bonded (or ground) to some other pervasive metal structure around the pool. ( e.g. the rebar in the concrete ) Some clients have done this using #8 copper wire. Regardless, this is the owner’s responsibility.

7. A water volume of 15 to 20 gallons per minute, per flume is sufficient for most of our water slides. Larger flume may be more appropriate at 20-30 gallons per minute.

8. Regulations may vary by state, county or municipality.  It is the pool owner's responsibility to understand and secure any required permits or licenses.  Occasionally, a regulator will ask for additional engineering documentation.  Wind, soil, structural analysis requirements are provided on a case per case basis for an additional charge.

 

Component Descriptions

The slides require 15-20 gallons of water per minute per slide flume to operate properly. Our slides require much less water to operate than most fiberglass-style slides. Typically we ask the customer to run a water line to the slide and cap the line with a standard hose bib. Then we supply the hose and connectors to take the water into the slide. If you don't have a water line that will be supplying the water, we can offer a 1/2 HP pump  that will pull water directly from the pool. We supply the pump and plumbing, but you are responsible for getting water to the pump. From the water line up the slide, we use a heavy duty, hard rubber hose. It is zip tied up the pipe to the top of the slide. We drill a hole in the side of the tube and install a brass 90 degree fitting in the tube so the water will shoot down the slide bed way. The hose is attached to the fitting using a hose clamp. We also apply silicone to the bottom half of the slide joints. This is done for each slide flume. We provide a “water kit” that has the fitting, hose clamps and silicone.

Display: List / Grid
Show:
Sort By:
Water Slide Model 108
One 30" diameter polyethylene flume unit! Flume is a hook slide with a 8' deck entry, 33&apos..
Call for Price
Water Slide Model 304 5792-0
Model 304 5792-0. 43' Flume (10' Deck Height), 48' Flume (16' Deck Height). Pric..
$50,127.00
Water Slide Model 8507-0
Water Slide Model 8507-0FREIGHT NOTE: Slides are big and can become costly when trying to ship. W..
Call for Price
Water Slide Model 5792-1
Waterslide Model 5792 1FREIGHT NOTE: Slides are big and can become costly when trying to ship. Wi..
Call for Price
Water Slide Model 103 5754-0
Model 103 5754-0. 18' Flume, 6' Deck Height. Price does not include installation. Water ..
$11,448.00
Water Slide Model 5758-0 #107
Two 30" diameter polyethylene flume unit! Flume 1 is a hook slide with a 6' deck entry, 24&apo..
Call for Price
Water Slide Model 205
One 30" diameter polyethylene flume unit! Flume is a spiral slide with a 12' deck entry, 46&a..
Call for Price
Water Slide Model 305 6320-1
Model 305 6320-1. Two 49' Flumes, 16' Deck Height. Price does not include installation. ..
$66,040.00
7 foot Deck Height Spiral Slide OPEN Bedway 450 Degree Dry Slide
The open spiral slide kit, AD450 Spiral Slide (Slide only, no ladder), 7 foot deck slide Some people..
$7,467.00
Water Slide Model 6368-2
Waterslide Model 6368 2FREIGHT NOTE: Slides are big and can become costly when trying to ship. Wi..
Call for Price
Water Slide Model 5780-0 #204
One 30" diameter polyethylene flume unit! Flume is an S Shape slide with a10' deck entry, 45&..
Call for Price
Water Slide Model 8393-0
Water Slide Model 8393-0FREIGHT NOTE: Slides are big and can become costly when trying to ship. W..
Call for Price
Water Slide Model 306 5794-0
Model 306 5794-0. 43' Right Hook Flume (12' Deck Height), 48' Center Spiral Flume (6&..
$74,054.00
7 foot Deck Height Spiral Slide OPEN Bedway 450 Degree Freestanding
The open spiral slide kit, AD450 Freestanding Slide(complete kit), 7 foot deck slideSome people call..
Call for Price
Water Slide Model 5793-0
Waterslide Model 5793 0FREIGHT NOTE: Slides are big and can become costly when trying to ship. Wi..
Call for Price
Water Slide Model 108 5817-0
Model 108 5817-0. 33' Flume, 8' Deck Height. Price does not include installation. Water ..
$16,028.00
Water Slide Model 5782-1 #206
Two 30" diameter polyethylene flume unit! Flume 1 is a hook slide with a 8' deck entry, 33&apo..
Call for Price
Water Slide Model 8488-0
Water Slide Model 8488-0FREIGHT NOTE: Slides are big and can become costly when trying to ship. W..
Call for Price
Water Slide Model PL307
25' Left Hook Flume, 43' Center Hook Flume, 48' Spiral Flume, 65' Right Spiral F..
Call for Price
9 foot 6 inch Deck Height Spiral Slide OPEN Bedway 630 Degree Dry Slide
The open spiral slide kit, AD630 Spiral Slide (Slide and deck, no ladder)Some people call this a Twi..
$10,667.00